The Kearny Fallout Meter or KFM is an expedient radiation meter Part1
In part2 I will show you how to charge and use it.

This is casein glue like the white glue we all use in school ( kind of)

1. Add vinegar to lukewarm skimmed milk so it curdles.
2. Drain the liquid component off from the solids.
3. Put solids onto a strainer to drain off excess liquid
4. In a bowl, add a base (such as sodium bicarbonate, ammonia or washing soda) to the curds, bit by bit, until they change into a creamy mixture. You now have casein glue.
Note that what you have at step 2 is low fat cottage cheese, so this can be used instead, skipping step 1.

This preparation lacks the antimicrobial present in commercial glue, so will spoil in storage. It may be frozen in ice cube trays for later use, or made when wanted.

Tarp-Tying Tips

If you have a tarp or space blanket, using rocks in the corners to tie into knots will make a much more stable shelter than will just weighing down the corners.

These were not even close to military spec. In fact probably expired when I got them.

I bought them a long time ago. They were supposed to be Military M.R.E. With heaters. if they were sold as camping or some other kind of M.R.E. then that would be ok. But they said 100% military issue. I think they were expired M.R.E.’s and repackaged then sold as new.

This is another great idea Duct Tape has so many many many usages. This is another great one.

I am going to start making these in advance . Im tired of wind blowing my  magnesium dust everywhere. With this I can just put it in the pile i’m lighting. I’m thinking now I bet i could drill a chap bar from Harbor freight ( Like the one i’m using ) and make better filings. I might also plug it up with char cloth or cotton balls who know. I can see a lot of possibilities for this.

I dont know why you would not buy a real seal but anything is better then dead in an emergency.

In an emergency an improvised Occlusive Dressing can be a life saver. It’s best to have a real one in your kit. they run about 25 bucks.
and you could easily make out of plastic and tape. But I carry this and a cheap extra.

This is a 4 part video series for what I think is a great Emp , Lighting etc suppressor. Its cheap but can on,yu take one really big hit. lesser hits are ok but a bit one will destroy itself and save your equipment. Thats why its in a metal; box.

Part 1 of 4  

Part 2

Part 3

Part 4

E.M.P. –Lighting — Solar storm — Solar Flare- Coronal Mass Ejection – Protection for the home or on the go.
The Info comes from here.
Electromagnetic Pulse and the Radio Amateur – Part 1
QST August 1986, pp. 15-20, 36 Google it if the links go down

Part 1 appears in QST August 1986, pp. 15-20, 36 (http://www.arrl.org/files/file/Technology/tis/info/pdf/88615.pdf)
Part 2 appears in QST September 1986, pp. 22-26 (http://www.arrl.org/files/file/Technology/tis/info/pdf/98622.pdf)
Part 3 appears in QST October 1986, pp. 38-41 (http://www.arrl.org/files/file/Technology/tis/info/pdf/108638.pdf)
Part 4 appears in QST November 1986, pp. 30-34 (http://www.arrl.org/files/file/Technology//tis/info/pdf/118630.pdf)

Im building the power protector from Part 4 page 34 (Figure 15)

The Mov’s “Siemens S14k130” can be ordered from http://www.digikey.com/ for about .50 cents each

It’s indoor and stealth good for getting info when the power is out or a natural disaster has happened.

Stealth Antenna is good when you can’t set one up outside.